Henke Mfg

Henke Snowplow Logo

J Plow – Trip Edge TorsionHenke J-Plow

  • Heights: 38”, 43”
  • Lengths: 10’, 11’, 12’
  • Five torsion springs (6th spring optional) of .75” square wire shall be tension-adjustable
  • 4” x 4” x 3/8” tube 109” long pushframe
  • Reversing cylinders 3” bore x 16 “ stoke
  • Polymer or steel moldboards

 

i Plow – Truck Mounted SnowplowHenke CSTE I-Plow

  • Moldboard Heights: 36”, 41”, 48”
  • Lengths: 10’, 11’, 12’
  • Available in a wide range of sizes and configurations
  • Multiple trip, hitch and running gear options available
  • “Integral Snow Shield” prevents snow from blowing over top
  • Double acting reversing cylinders
  • Serviceable Chevron Style V-Gland Packed Cylinders
  • Cutting edge conforms to AASTHO punch pattern

 

Multiblade 3-in 1 ReversibleHenke MULTIBLADE PLOW 3-blade system

  • Moldboard Height: 41”
  • Lengths: 10’, 11’, 12’, 14’
  • 10 gauge moldboard
  • (8) vertical ribs
  • 4” heavy duty semi-circle
  • Power reversible
  • Polar flex cutting edges – 1st set
  • “Cheese blades” for ice pack – 2nd set
  • Rubber edge for slush – 3rd set
  • Pneumatic cylinders to engage blades, with in cab pressure regulator and control switch

 

HDPW or MDPW Parallel Lift PlowHenke Parallel LIft Plow

  • Moldboard Height: 43”
  • Lengths: 10’, 11’, 12’
  • Steel or polymer moldboard
  • (10) vertical ribs
  • Inverted “J” shaped moldboard
  • Power reversible
  • Truck hitch stays with plow when disconnected
  • Flat plate remains with truck
  • Unit hydraulically lifts on and off flat plate

 

FVX – Folding Vee for TrucksHenke Orange Folding Vee

  • Moldboard Height: 41″
  • Lengths: 147″
  • (2) Independent 3.5” bore. 16.5” stroke with 2” rod hydraulic cylinder
  • Level lifting provided by pitch cylinder movement of tilt hinge
  • Compression trip edge safety trip device w/(6) 21” long springs of .625” wire
  • Width: Angled Mode: 121″. Vee Mode: 125.5″. Scoop Mode: 116″
  • Approximate weight – 2,400 lbs. depending on configuraiton

 

UBS-XH or UBS-STD Underbody ScraperHenke UBS-XH2

  • Moldboard Heights: 17” or 20” on XH model
  • Lengths: 10’, 11’, 12’
  • Medium & Heavy truck application
  • Equipped with 4.0” x 2.5” reversing cylinders
  • Actuating cylinders are 3” x 2”
  • 5” grease-able center pin
  • Poly wear pads on circle clamps
  • Moldboards made of heat-treated carbon steel
  • Moldboards cushioned by (2) heavy duty spring shock assemblies
  • Reinforced steel trunion brackets
  • All moving parts equipped with grease zerks
  • Easy replacement of actuating canister assemblies
  • Dual reversing cylinders
  • Downpressure relief and crossover relief