Tailgate Spreaders

Swenson Products

SAD-6 Hydraulic DriveSwenson SAD6-Auger

  • Designed for 15,000+GVW trucks with ground clearances greater than 44”
  • Hydraulic Safety Interlock system disables auger when opening bottom door or top cover
  • Hinged bottom door makes clean out and blockage removal easy
  • Spinner stays parallel to the road even when the dump body is raised
  • Material drop port is located 21” from left end plate
  • Anti-flow plates save material by preventing free-flowing of material
  • Available with direct drive auger motor for higher performance and lower maintenance
  • Available with gearbox driven auger motor for better control
  • Separate hydraulic motors for auger and spinner allows for better control and spreading
  • Unit mounts below dump body floor to allow normal dump body operations when spreader is not in use
  • Available in stainless steel or steel construction

 

SBD-9 Hydraulic DriveSwenson SBD-9 Spreader

  • Designed for 20,000+GVW trucks with ground clearances greater than 44”
  • 9” Auger is designed to spread larger aggregate or higher volumes of material at either left or right end
  • Hydraulic Safety Interlock system disables auger when opening bottom door or top cover
  • Hinged bottom door makes clean out and blockage removal easy
  • Includes 24” berm chute for shoulder applications
  • Spinner stays parallel to the road even when the dump body is raised
  • Material drop port is located on extreme left end and right for discharge on either side.
  • Anti-flow plates save material by preventing free-flowing of material
  • Available with direct drive auger motor for higher performance and lower maintenance
  • Separate hydraulic motors for auger and spinner allows for better control and spreading
  • Unit mounts below dump body floor to allow normal dump body operations when spreader is not in use
  • Available in stainless steel and steel construction

 

SEL Electric DriveSwenson SES Electric Spreader

 

RTJ/RTJ-XL Replaceable Tailgate – HydraulicSwenson RTJ-Tailgate-Spreader

  • Designed for 15,000+ GVW trucks
  • Hydraulic Safety Interlock system disables auger when opening bottom door
  • Hinged bottom door makes clean out and blockage removal easy
  • Integrated agitator bar keeps material free flowing to minimize clogging
  • Adjustable in height spinner frame can be mounted on various height vehicles
  • Anti-flow plate prevents material face flow and helps minimize material waste
  • Available in stainless steel and steel construction

 

RTEL Replaceable Tailgate – ElectricSwenson RTEL Replacment Tg Spreader

  • Designed for 15,000 + GVW trucks
  • RTEL replaces existing tailgate on your dump body
  • The electric drive RTEL utilizes your truck’s electric system so no expensive central hydraulic system is needed
  • Amperage draw of 80 amps total
  • Patent pending Electric Interlock System (EIS) permits disabling of auger when opening bottom door or top cover
  • Separate electric motors allow independent control of the auger and spinner
  • Anti-flow plate prevents material free flow and helps minimize material waste
  • Dual speed variable controller allows for separate independent control of the auger and the spinner disk
  • Available in stainless steel and steel construction

 

STCC Cross ConveyorSwenson Cross-Conveyors-Hydraulic

  • Designed for Class 7 + trucks (26,000 GVW )
  • An All-Around Performer designed for year round use including:
    • Trench Filling
    • Shouldering
    • Road Sander
    • Asphalt Patching
  • High Temp Belt Over Chain handles a variety of materials to either side of truck
  • Hinged Top Cover makes dump truck functional during non-spreading operations
  • Screw type gate jacks allows precise material output adjustment, even when loaded.
  • Quick Detach 24” extension plate can be used on either side of conveyor”
  • Dual Feedgate allow materials to be discharged on either side of truck
  • Available in stainless steel and steel construction

 

TailHawk 350 Receiver Mount – ElectricSwenson TailHawk 350

  • Thermo plastic construction offers a low maintenance solution.
  • One piece cover allows for easy filling of material.
  • 12v direct drive high torque motor grinds through large chunks of material.
  • Designed to spread all bagged free flowing material.
  • In cab controller allows you to control your spread pattern.
  • Blast mode provides an on-command surge to grind through harder chunks.
  • Various mounting methods to fit a wide variety of vehicles.
  • Spread up to 20’.
  • All frame components are powder-coated paint to provide a longer lasting spreader.
  • 2 Hopper capacity available (5.75 cu ft/10.75 cu ft) to meet your spreader needs.
  • Optional vibrator kit for sand applications, top screen to keep large chunks out, flow gate to help regulate flow, motor guard to protect the electric motor.

 

TailHawk 750 Receiver Mount – ElectricSwenson TailHawk 750

  • Thermo plastic construction offers a low maintenance solution.
  • One piece cover allows for easy filling of material.
  • 12v direct drive high torque motor grinds through large chunks of material.
  • Designed to spread all bagged free flowing material.
  • In cab controller allows you to control your spread pattern.
  • Blast mode provides an on-command surge to grind through harder chunks.
  • Various mounting methods to fit a wide variety of vehicles.
  • Spread up to 20’.
  • All frame components are powder-coated paint to provide a longer lasting spreader.
  • 2 Hopper capacity available (5.75 cu ft/10.75 cu ft) to meet your spreader needs.
  • Optional vibrator kit for sand applications, top screen to keep large chunks out, flow gate to help regulate flow, motor guard to protect the electric motor.